1. 1. In order to achieve an appropriate colour harmony, the contents of the different boxes must be mixed.
   2. Floor tiles will be laid aligning the rear slots in the same direction.
   3. The joint between tiles must be greater than 10 mm. For a good finishing.
   4. The laying must be carried out by professionals. It is recommended to use the thread on the higher measure of the surface to be covered, placing it in the middle of the mortar joint to be a reference on the tile-laying process. (The use of plastic crossheads in the corners is not advisable due to slight caliber changes ± 2 mm.)
   5. Expansion joints will be set (every 12/15 m2) “in the right way” on those surfaces exposed to the elements.

tile-laying in the open

1. It is essential to have a stable bearing, capable of blowing off water through gradients.
   
2. Gripping materials must cap the piece totally in order to avoid incorrect settlements and risk of breaking, and it must have the right features for the product and location.
   
3. Joints in frost-risky areas must be set with elastic and impermeable materials.